CARDAS AUDIO CABLE FOR APPLICATIONS
- Golden Cross Diagram brings you a Total Hifidelity Listening ! -
 Made In USA
 

Cardas Crosslink

* Conventional drawing process, adds impurities, hardens and oxidizes the copper.
But Cardas developed a method to actually purify and super anneal the conductor during manufacture.

* Cardas uses only custom diamond dies to protect and polish the wire each time it is drawn.

* A special coating to protect the copper between drawing stages and after its production.

* Golden Ratio,Constant 'Q',pure copper Litz conductors from 33 awg to 7 awg.

* The wire is pulled into an oxygen free atmosphere where it is given a protective coating. 

* Please allowed about minimum 2 hours burn-in, so as to get 80% of it's performance.

* Golden Ratio: 1.618033989...: 1

Cardas Golden Power Cord
Musical Power wire, 15mm dia., 3 multi strands + tinned copper shielding(may apply as grounding), pure copper Litz wire, brown jacket

Cardas Cross Link(for uses in Speaker/Power wire)
This is the famous"Silent Conductor". It is the silence of Cardas conductors that allows them to be so uniquely musical and pure.

 CROSS LINK INTERCONNECT(For chassis hook up):
0.305" outside diameter, 19.5 AWG multi-string, polypropylene insulated unenamled high purity copper stranded conductors

 CROSSLINK SPEAKER( for speaker/Power uses):
0.365" outside dia, 12 AWG multi-string, polypropylene insulated unenamled high purity copper stranded conductors

Cardas Crosslink

Cardas Chassis Wires
Descriptions,  Phono(specially for uses in Tone Arm & Cartridge);

23.5 AWG Chassis Wire
33 AWG Tone Arm Wire, wire in 4 colors
4 x 33 AWG Tone Arm wire, braided shield, flexible rubber jacket

4x33 tone arm wire unshield
4 x 33 AWG Tone Arm wire, unshielded, pair twisted x 2

Line Lever(ie:Chassis wire for Pre/Power Amp);
21.5 AWG Chassis Wire
19.5 AWG Chassis Wire

Tweeter(ie:Speaker wire for tweeter);
19.5 AWG Chassis Wire
18.5 AWG Chassis Wire
17.5 AWG Chassis Wire

Mid-Range(ie:Speaker wire for mid-range);
17.5 AWG Chassis Wire
15.5 AWG Chassis Wire

Woofer(ie:Speaker wire to use in woofer);
15.5  AWG Chassis Wire
11.5  AWG Chassis Wire
9      AWG Chassis Wire

Multi Strand Chassis Wire;
2 x 20.5 AWG Chassis Wire,
2 x 15.5 AWG Chassis Wire,

2 x 11.5 AWG Chassis Wire
3 x 20.5 AWG Twisted Strand in Jacket,
2 X 11.5 AWG Twisted Strand in Teflon Taped,

4 X 11.5 AWG Twisted Strand in Teflon Taped,

Home Theater Speaker wire
- 15T2 Wire, 2 x 15.5  AWG Wire
With about 50 strings(inner) + 62 strings(outer), insulated by teflon tape
- 9T2 Wire, 2 x 9 AWG Wire

Home Theater speaker wire

Digital + RCA signal end Electronics Shield
(single strand for digital/ signal output);
1 X 21.5 AWG Coax

Input Line Level(two strand for signal input/output);
2 X 21.5 AWG with shield
2 X 21.5 AWG with shield, Reference

Interlink Dual Shield(ie: for pre/power signal inter-connects);
2 X 21.5 AWG with dual shield
2 X 23.5 AWG with dual shield
2 X 23.5M AWG with dual shield
and cored cotton string
4 X 23.5 AWG with shield 
2 x 24M AWG with dual shield

Twisted Pair Speaker Wire/Power Cord(for speaker/power line);
Multi-strings, 2 strands
2 x 20.5 AWG, jacket in red, 4.5mm dia.
2 X 15.5 AWG, jacket in black, 5mm dia. 

2 X 11.5 AWG, wraped by white teflon tape, 6 mm dia.
2 X 11.5 AWG, Jacket in black, 7.5 mm dia.
4 X 11.5 AWG, wraped by white teflon tape, 4 strands, 8 mm dia.

Twinlink 5C Speaker/Power wire
2 X 15.5 AWG with shield,7 Amp
Also fit well for signal wire between pre/power amp


Cardas coaxial signal cable new
RG179 0.25mm pure solid copper core, tinned copper shield(may apply as grounding), inner & outer teflon dielectric and jacket, 2.3mm outside dia., white

Cardas coaxial speaker cable
- SE15 Coaxial speaker cableNEW
both multi strings conductors, wrapped by teflon tape insulated, 5.5 mm outside dia., blue Jacket

- SE11 Coaxial speaker cable NEW
both inner & outer multi strings conductors, wrapped by teflon tape insulated, 5 mm outside dia., light blue Jacket

- SE9 Coaxial speaker cable NEW
both multi strings conductors, wrapped by teflon tape insulated, 6 mm outside dia., black Jacket

SE15(above), SE11(mid), SE9(bottom)SE15/SE11/SE9

Cardas multi strand speaker/power cable
- Cross Link 2 Due strands speaker/power cable NEW
2 strands/multi strings, PVC core, cotton string+ teflon taped dielectric insulator, blue jacket, 9.4mm outside dia.

Cross Link 2

- Cross Link IS 4-strands speaker/power cable NEW
4 strands each with pvc core/multi strings, PVC core & teflon taped dielectric insulator, blue jacket, 10mm outside dia.


- Cross Link 6 6-strands speaker/power cable
NEW
6 strands each with pvc core/multi strings, PVC core & teflon taped dielectric insulator, blue jacket, 11.5mm outside dia.


- Cross Link 8 8-strands speaker/power cable NEW
8 strands each with pvc core/multi strings, PVC core +teflon taped dielectric insulator, blue jacket, 14mm outside dia.

Cross Link 6 & 8

- 3 x 10 solid speaker/power cable NEW
3 strands, solid copper wire in 2.5mm dia, Red jacket, 11mm outside dia


Cardas 6N Pure Copper metal
Coated wire:0.2mm, 1.0mm, 1.2mm
Bared wire:0.6mm, 0.8mm, 1.0mm, 1.2mm & 1.5mm

Cardas' other parts includes;
Binding Posts/Plugs/Chassis Socket/Spades/Jumps/Speaker Pins/DINS/Phono Boxes/Grounds/Solder and Flux/Non-Enameled conductor strand/,Capacitors, LP Sweep Record, MC Cartridge/Clips ...etc.

Last updated on 4/17/14