Selected Audio Variable Pots, Attenuators & Switches
OdO424H 23 position ladder Attenuator new
Designed for hi-end audio volume control.
A type ohmic law, impedance 500K

Use of;
- Holco precision metal film resistor, tol. 0.5%, 0.5W
- OdiO pure silver lead wire, 0.8mm dia.
-
EM04-4130 ELMA Rotary Switch
4 pole, 24 position, gold flash pins
indexing angle 15¢X
Shorting, with solder eyelet
Size: 40mm x 37mm x 103mm

SEIDEN Select Switch
 MFG. of Japan

SD32NEG2-2-23 23 position, stereo
Shorting type, for volume control
Overall size: 37 x41 x60mm(D), 6mm shaft

SD32NEG4-4-23 23 position, stereo
Shorting type, for 4 channel/balance volume control
Overall size: 37 x41 x83mm(D), 6mm shaft

SD32NEG1-2-6 6 position, stereo
Non-shorting, for input select
Overall size: 34 x38 x49mm(D), 6mm shaft

Characters:
Load voltage/current: DC 200V/AC 0.2A
contact/isolation impedance: >5 m ohm(DC 6V/1A) / >1000M ohm(DC500V)
Max. voltage: DC 500V 1 minute
Rotary torque: 0.5 ~ 1.5Kg
Duration: >50000 times(unload)

SWSPPO 1P Push-Button Switch
13 x 30mm x 39mm(H), 11.7 mm fixing hole, 1 pole, push-on/release-off

SW3PDT 3P PUSH-ON Switch
Mfg. of USA
19 x 17mm x 42mm(L), 11.7 mm fixing hole, extra set of poles allows for true bypass with an LED for pure unaffected tone., 3P, Push On-On
NOBLE pots VR-NB27 NOBLE Variable Resistor
Square, stereo,
Made in Japan
27 x 26mm, 62 mm(L), A type(log)ohmic, with laudness lead out
Impedance: 50K, 100K, 250K & 500K
RS pot VR-RS28 RS Variable pot
Round, MONO, suit for adjusting bias,
Mfg. of UK
28 x 28mm, 43 mm(L),, Type A impedance
impedance: 250 ohm
AB mod pot VR-AB16 AB Variable pot
MONO, Round, Log ohmic
(A type) ,16 x 16mm, 37 mm(L),
Impedance: 5K,25K,50K, 500K & 1M
Litton Potentiometer,mono VR-LIT34 LITTON Variable Pot
MONO,Round,
,6mm dia. shaft
34mm dia x 15mm, 51 mm(L), Log type ohmic,
gold plated pin,no step
, Mfg. of UK
Impedance: 100KA
French made Vishay Sfernice Ceramic Semi-fixed variable resistor
T93YA 0.5W, 85
°C, tol. 10%, 50ppm
3/8" SQ,22 turns, fully sealed
Mil. spec and Pro grade, 3/8" x 3/8" x 3/16", contacting point tol. <1%, lead to lead: 2.54mm, high tone for sound
Impedance:100, 200, 500, 1k, 2k, 5k, 10k, 20k & 100K
French Vishay Sfernice Ceramic Variable pot
20mm Round, fully sealed, MIL spec & Pro grade,
270°+/-10°,tol 5%, 6mm shaft dia.,20mm dia x 45mm,
for 10mm(recess 8mm)fixing hole, high tone

PE30 3W, 70°C, tol. 5%, log(A type ohmic law), Mono
Impedance:100K

French Vishay Sfernice Ceramic Variable Pot
12.5mm SQ, mini size in fully sealed, meet with MIL spec, long life
270°+/-10°,tol 5%, 6mm shaft,12.5mm x 36mm,
for 10mm(recess in 8mm)fixing hole, design for studio mixer in high tone

P11VY-M 1W, 70°C, tol. 5%, log(A Type ohmic law), Mono
Impedance: 250K

P11VY-S 1W, 70°C, tol. 5%, log(A type ohmic law), Stereo
Impedance(A type):100K
Impedance(S curve type):10K,20K,50K, 250K, 500K

RS2 2 Step Selector
17mm x 24mm Sq,6mm shaft(recess in 5.5mm)
for 9.5mm fixing hole,DPST ON-ON, silver plated contact point, able to accept 10ms instant at current 64A
RS43 4 pole 3 Step Rotary Switch
4 pole each 3 steps, 26mm dia. x 70mm, 6mm shaft and 42mm in length, for 9.7mm fixing hole, silver plated contact point, Max carry current 5A, contact rating 250VAC/DC 150mA, Max panel thickness 3.5mm , UK mfg., solder tag, glass-filled nylon
RS6 6 Step Rotary Switch
26mm dia. x 70mm, 6mm shaft and 42mm in length, for 9.7mm fixing hole, silver plated contact point, Max carry current 5A, contact rating 250VAC/DC 150mA, Max panel thickness 3.5mm , UK mfg., solder tag, glass-filled nylon
 

VL-A40 L Pads Level Control
tweeter attenuator,
L-8Ω, 10W, 0-12 & infinite -dB,10 section adjust
Vialet, Japan Mfg.,
Size: 66 x 66mm(panel)x 3mm thickness
61mm cut out(install), 50mm(D)

VL-A80 L Pads Level Control
tweeter attenuator,
L-8Ω, 30W, 0-12 & infinite -dB,10 section adjust
Vialet, Japan Mfg.,
Size: 66 x 66mm(panel)x 3mm thickness
61mm cut out(install), 58mm(D)

AT50H L Pads Level Control
tweeter attenuator,
wire wounded, L-8Ω, 50W, 300° ±5°, Mono
Taiwan Mfg. 6mm shaft, shaft length 32mm in M9 thread

Panel size: 54mm SQ(PVC panel)
Tuning knob size: 32mm dia. x 17.5mm(H)
Pad size: 50 x 55 x 29mm(body thickness), 60mm (H)

HBL22SP HUBBELL Power Toggle Switch
Double pole/Double Throw On-On 
20A 125V, nickel plated Spade terminal
size: 34 x 19 x 59mm(H),11.7mm fixing hole
USA.

HBL12SP  Hubbell Power Toggle Switch 
Single pole/Double Throw On-On 
20A 125V, nickel plated Spade terminal
size: 29 x 14.5 x 54mm(H),11.7mm fixing hole 
USA.
HBL223SP Hubbell Power Toggle Switch 
Double pole/Double Throw, On-Off-On 
20A 125V, 20SER, Brass plated spade terminal
size: 34 x 19.5 x 59mm(H),11.7mm fixing hole
USA.
 

MSHITA 22SP  Power Toggle Switch 
Matsushita Double pole/Double Throw, On-On 
15A 250V, Silver plated contact point
size: 33 x 19.5 x 56mm(H),11.9mm fixing hole
Japan
.

6A(left) 3A(shown on the Right)



FTN79

STO Toggle Switches
Double pole/Double Throw On-On 
gold plated spade terminal
Japan

ST1313-6-ONN 6A 125V, ON-ON
size: 13 x 13 x 33mm(H),6mm fixing pole

ST1313-6-ONF
6A 125V, ON-OFF-ON
size: 13 x 13 x 33mm(H),6mm fixing pole

ST1011-3-ONN 3A 125V, ON-ON
size: 10 x 11 x 30mm(H),6mm fixing pole

FTN49 Toggle Switch
Double pole/Double Throw On-On 
6A 125V, gold plated spade terminal,
size: 15 x 13 x 38mm(H),6mm fixing pole , Japan

F4TN49 Toggle Switch
Quad pole/Quad Throw On-On 
6A AC 125V, gold plated spade terminal,
size: 23 x 15 x 38mm(H),6mm fixing pole, , Japan

CK7201 Toggle Switch
Double pole/Double Throw On-On 
5A 120VAC, silver plated spade terminal,
size: 8 x 11.5 x 33mm(H),6mm fixing pole, C&K USA 

FTN79 Toggle Switch
Double pole/Double Throw On-On 
6A 125V, gold plated spade terminal,
size: 15 x 13 x 48.5mm(H),6mm fixing pole, Japan

.
 Eagle rock switch 15A

SCH1922-10A
SCH1552-16A
SCHT120-20A
SCHT-3IN1-10A

EAGL-15A Eagle Rocker Switch
DPST On-Off, 15A 125V/10A 240VAC
Cut-out: 28mm x 19mm
Silver contacts, with polit light, USA Mfg.

SCH1922-10A Rocker Switch
DPST On-Off, 10A 125V~250VAC
Cut-out: 22mm x 19.4mm
Silver contacts, Schurter, Swiss

SCH1552-16A SlimLine Rocker Switch

DPST On-Off, 16A 125VAC
Cut-out: 12.2mm x 28.5mm
Silver/Brass contacts, Schurter, Swiss

SCHT120-20A LED Rocker Switch LED
DPST On-Off, 20A 125VAC
Cut-out: 22mm x 30mm
Silver contacts, Schurter, Swiss

SCHT-3IN1-10A
3 IN 1 Power AC inlet with Fuse holder and Rocker

Power AC inlet with Fuse box + Rocker Switch

DPST On-Off, 10A 125VAC
Cut-out: 67mm x 27.8mm
Brass/tinned contacts, Schurter, Swiss


Alum. turning knob extension set

ALUXB-s30 Alum. Tuning Pole Extend Kit
Length:30 cm, 6 mm dia. (or 15cm length
)
High quality anode plating over alum. alloy.
3pcs set; Alum. rod,fixing eyelet, connecting jacket with 4 screws

ALUXB-s15 Alum. Tuning Pole Extend Kit
-- ditto --, but in 15cm length



ALUXB-d30 Alum. Tuning Pole Extend Kit
Length:30 cm, 6 mm dia. (or 15cm length)

High quality
anode plating over alum. alloy.
3pcs set; Alum. rod,fixing eyelet, connecting Ceramic disk jacket with 4 screws(ALUX-ch)

ALUXB-d15 Alum. Tuning Pole Extend Kit
-- ditto --, but in 15cm length

ALUX-ch22 Extension pole coupler
Length:19 cm, 22mm dia.

isolated by ceramic disc, holds 6mm dia. of extension pole, chromed plated metal parts

ALUX-ch31 Extension pole coupler
--ditto-- but
Length:17 cm, 31mm dia.

Above all are with 6mm dia. shaft
Last updated on 7/6/16