WBT Plugs and miscellaneous

WBTThe art of connection
Gold plated RCA plugs & Sockets, Banana Plugs and Binding Posts

Made in Germany

	WBT-0660 Sandwich type Copper +stainless steel Y spade Copper with gold plating, inside diameter of 1/4"(6mm) Y spade, crimp terminating, top of line WBT-0680 Sandwich type Copper + stainless steel Y spade Copper with gold plating, same as above, inner diameter of 5/16"(8mm) Y spade.
	WBT-0102Cu Topline RCA nextgen plug, copper with signal conductor made of pure copper and nickel free gold plated. one-piece pure copper signal conductor, wideband capability up to 200 mHz, two-piece clamping sleeve in black piano lacquer, Solder terminations WBT-0102Ag Topline RCA nextgen plug, silver -Ditto- but signal conductor made of fine silver
	WBT-0110Cu RCA nextgen plug topline, pure copper conductor, Solder terminations, nickel free gold plated. Two-piece clamping sleeve, cobalt blue. The central contact unit can be removed for ease of installation. accommodate cable with a maximum outside diameter of 9.0 mm WBT-0110Ag RCA nextgen plug --Ditto--, but Signature line, silver conductor, platinum plated.
	WBT-0101 RCA plug topline, Solder terminations, adjustable barrel, Teflon dielectric, accommodate cable with a maximum outside diameter of 9.0 mm
	WBT-0108 RCA plug topline, crimp terminating, adjustable barrel, Teflon dielectric, accommodate cable with a maximum outside diameter of 9.0 mm
	WBT-0147 RCA plug midline, solder terminating, adjustable barrel, Teflon dielectric, accommodate cable with a maximum outside diameter of 7.8 mm
	WBT-0144 RCA plug Topline, solder terminating, adjustable barrel, Teflon dielectric, accommodate cable with a maximum outside diameter of 9.0 mm
	WBT-0150 RCA plug midline, solder terminating, adjustable barrel, Teflon dielectric, accommodate cable with a maximum outside diameter of 11.7 mm, 59mm Long
	WBT-0210Cu RCA nextgen Socket topline, pure copper conductor, Solder terminations, nickel free gold plated, MS version in metal nut. Positive pole: spring loaded WBT double prism contact. Negative pole: patented double-wave contact. Teflon dielectric. Torsion proof mounting. Tightens from outside using the included three-hole counter nut. Transmission bandwidth 1 Ghz. Eddy current free. WBT-0210Ag RCA nextgen Socket --Ditto- but silver conductor
	WBT-0244 RCA chassis socket, solder type terminating WBT-0208 RCA chassis socket, crimp type terminating
	WBT-0274 RCA PCB OEM Special for board mounting(angled). Secure screw connection to board. double prism contact made of pure copper. tighten from outside by using three-hole nut. soldering type pole connection.
	WBT-0201 RCA Socket Spring-loaded internal contacts for a secure connection. 24K gold plated for corrosion resistance Teflon insulation, solder type terminating
	WBT-0600 Banana plug,deluxe accommodate conductors up to 10 mm² (7 AWG), pressure expansion tip, crimp type terminating WBT-0644 Banana plug, standard accommodate conductors up to 10 mm² (7 AWG), pressure expansion tip, crimp type terminating
	WBT-0610ag nextgen Banana Plug Signature, made from fine silver conductor, nickel-free direct platinum plating, secured with an expandable contact pin, crimping with WBT double Torx screw system, CE and IEC compliant, mass-reduced nextgen principle
	WBT-0610cu nextgen Banana Plug Top line, made from fine pure copper, nickel-free 24 carat direct gold plating, secured with an expandable contact pin, crimping with WBT double Torx screw system, CE and IEC compliant, mass-reduced nextgen principle
	WBT-0645 Angled Banana plug midline, with safty pin, 24K gold plated, locking banana plug, suitable for bi-wiring, crimping with WBT double Torx screw system, accommodate conductors up to 5 or 7mm dia.
	WBT-0730 5 way Binding posts high contact pressure grooves for increased pressure, accept max of wire diameter of 10 mm² (7 AWG), crimp type terminating, rated up to 200 AMPs continuous
	WBT-0730-01 Topline Pole Terminal high contact pressure for spades thanks to fine thread and cross-milled surface, two-piece clamping nut, solder or crimp connection with Torx screw, 24K multi layer gold plating(nickel-free), Max. constant current 70A, twist-proof mounting, Puzzle plate system
	WBT-0735 Topline Pole Terminal high contact pressure for spades thanks to fine thread and cross-milled surface, two-piece clamping nut, solder or crimp connection with Torx screw, 24K multi layer gold plating(nickel-free), Max. constant current 70A, twist-proof mounting, Puzzle plate system, CE and IEC compliant
	WBT-0765 Midline Pole Terminal Midline, copper alloy, gold plated with makrolon full insulation, high contact pressure for spades thanks to fine thread and cross-milled surface, two-piece clamping nut, solder or crimp connection with Torx screw, 24K multi layer gold plating, Max. constant current 70A, twist-proof mounting, Puzzle plate system
	WBT-0702-01 Deluxe 5 way binding post Topline, high contact pressure grooves for increased pressure, rated up to 400A continuous current, crimp type terminating accept cables up to 6 mm² (10 AWG), spade connectors, patented locking device for banana plug. Can be wired by soldered or crimped WBT-0702-12 Deluxe 5 way binding post Topline Signature Series, Highly polished version, platinum plating high contact pressure grooves for increased pressure, rated up to 400A continuous current, crimped wire ends up to 6 mm² (10 AWG), accept spades and banana plug. lead wired by soldered or crimped.
	WBT-0763 Midline Pole Terminal Midline, copper alloy, high contact pressure for spades thanks to fine thread and cross-milled surface, two-piece clamping nut, solder or crimp connection with Torx screw, 24K multi layer gold plating, Max. constant current 70A, twist-proof mounting, Puzzle plate system
	WBT-0710 Deluxe 5 way binding post fully insulated, high contact pressure grooves for increased pressure, rated up to 200 AMPs continuous, solder type terminating accept cables up to 6 mm² (10 AWG) WBT-0710Ag Deluxe 5 way binding post, silver conductor -- ditto -- but with high-purity silver signal conductor
	WBT-0725 Jumper Bridge high qulaity, pure copper to replace jumper wire or cheap, brass bridges, fully insulated. center to center Y spade, holds 6 mm dia.of speaker binding post Available both pure copper and pure silver version
	WBT Crimp Sleeves 24K gold plated, dimension in inside diameter WBT-0434 2.2mm dia.x15 mm,for AWG#14 cable WBT-0435 3mm dia. x 9 mm,for AWG#12 cable WBT-0436 3.6mm dia. x 10 mm,for AWG#10 cable WBT-0437 4.6mm dia. x 11.6 mm,for AWG#8 cable WBT-0438 6mm dia. x 15 mm,for AWG#6 cable Gold plated Crimp sleeves, with insulated collar WBT-0445 4.6mm dia. x 27.5 mm,for AWG#8 cable Silver Crimp sleeves with insulated collar WBT-0453 3.6mm dia. x 20 mm,for AWG#10 cable * Cardas Crimp sleeve, gold plated Cds-Crislv917 9mm dia. x 17 mm,for 9mm dia. cable

Please contact for items not listed
Last updated on 10/23/05