Mundorf For The Love Of Music
Made in Germany
 Mcap MKP Metalized
PP capacitor, Supreme silver/Gold series
This metallization of the capacitor foil for Mcap SUPREME SILVER/GOLD consists of pure silver, to which 1% gold of the finest purity is admixed. metalization: 99% silver/1% gold.
The technical precision and rapidity of the Mcap SUPREME SILVER/GOLD harmonize perfectly with musical beauty and elegance: From complete silence instruments and voices develop their entire vivid variety,clarity and strength in a wonderfully transparent auditory ambiance.
Application ex.;
in signal and speaker coupling or parallel
Capacitance, Size:Dia x Length, tol 2%(typ. 1%)
0.01 uf/1200V 12.5 x 35mm
0.022 uf/1200V 17 x 35mm
0.033 uf/1200V 17 x 35mm
0.047 uf/1200V 17 x 35mm
0.068 uf/1200V 17 x 35mm
0.1 uf/1200V 17 x 35mm
0.15 uf/1200V 17 x 35mm
0.22 uf/1200V 17 x 35mm
0.33 uf/1200V 19 x 38mm
0.47 uf/1200V 21 x 38mm
0.56 uf/1200V 25 x 38mm
0.68 uf/1200V 25 x 38mm
0.82 uf/1200V 31 x 40mm
1 uf/1200V 31 x 40mm
1.5 uf/1200V 36 x 40mm
2.2 uf/1200V 36 x 54mm
2.7 uf/1200V 36 x 54mm
3.3 uf/1200V 41 x 54mm
3.9 uf/1200V 41 x 64mm
4.7 uf/1200V 46 x 70mm
5.6 uf/1200V 46 x 70mm
6.8 uf/1200V 51 x 70mm
8.2 uf/1200V 51 x 70mm
10 uf/1200V 51 x 105mm
Mcap MKP Metalized
PP capacitor, Supreme silver/Gold/oil series
The MCap® SUPREME silver/gold/oil is top-of-the line model of Mundorf oil impregnated capacitors. In comparison with the Silver/Oil version, it technically features a further extended lifetime.
More importantly, sonically the Silver/Gold/Oil version stands out due to its wonderful natural singing and exceptional micro dynamic, same time.
Technical specifications:
Dielectric: Polyprophylene
Metallisation: 99.99% silver, 1% gold
Purity of silver: min. 99.97% typ. 99.99%
Purity of gold: min. 99.97% typ. 99.99%
Dielectric strengh: 1200V DC
Loss factor tan ∂: 0.0002@1 kHz, 0.0001@10 kHz
Capacitance, Size:Dia x Length, tol 2%(typ. 1%)
0.01uf/1200v 17 x 36mm
0.068uf/1200v
0.1uf/1200v 17 x 36 mm
0.22uf/1200v 19 x 39 mm
1uf/1200v 31 x 42mm
1.5uf/1200v 36 x 42 mm
2.2uf/1200v 36 x 56 mm
2.7uf/1200v 36 x 56 mm
3.3uf/1200v 41 x 57mm
3.9uf/1200v 41 x 57mm
4.7uf/1200v 46 x 71mm
5.6uf/1200v 46 x 71mm
6.8uf/1200v 51 x 71mm
8.2uf/1200v 51 x 71mm
10uf/1200v 51x 106mm
Mcap MKP Metalized
PP capacitor, Supreme-silver oil series
This type is an oil impregnated metallised polyprophylene dielectric capacitor, with the same series wiring as our Mcap SUPREME capacitors. Metalization: 99.99% silver
High purity silver is used for the capacitor coating, and the winding is impregnated with a special oil developed in an exhaustive series of experiments and listening tests.
Both these features contribute to an even fuller and smoother tonal richness and diversity.
This cap ability to bring out the finest nuances and the most subtle distinctions make the music sound more alive and "juicy", yet without unnatural emphasis of any individual effects.
If you're serious about
high end, you need to try this capacitor!
Application ex.;
in signal and speaker coupling or parallel
Capacitance, Size:Dia x Length, tol +/- 7%, VDC
0.1uf/1200V 16.5 x 34mm
0.15uf/1200V 16 x 34mm
0.22uf/1200V 18 x 37.5mm
0.33uf/1200V 18 x 37.5mm
0.47uf/1200V 20 x 39mm
0.68uf/1200V 25 x 39mm
0.82uf/1200V 30 x 39mm
1 uf/1200V 30 x 39mm
1.5 uf/1200V 35 x 38.5mm
2.2 uf/1200V 40 x 55mm
2.7 uf/1200V 40 x 53mm
3.3 uf/1200V 40 x 53mm
3.9 uf/1200V 40 x 55mm
4.7 uf/1200V 40 x 69mm
5.6 uf/1200V 45 x 69mm
6.8 uf/1200V 45 x 69mm
8.2 uf/1200V 50 x 68mm
10 uf/1200V 45 x 105mm |
Mtubecap PP Capacitor for tube Amp. use
 
The TubeCap is made of polypropylene film with special features.
The TubeCap combines a high degree of dielectric strength and low residual inductivity with a very compact form of construction.
It has been developed as a high quality technical alternative to high-voltage electrolytic capacitors.
The advantages vis-a-vis electrolytic capacitor are:
Lower ESR and lower residual inductivity
No drying out; therefore longer service life
Self-healing properties
More compact form of construction
There is no series connection necessary for increasing the dielectric strength.
The tubeCap contributes to a cleaner, livelier and higher-definition sound impression.
Capacitance, Size:Dia x Length, ESR(mOhm at 10kHz) / ESL(nH)
10uf/1000VDC, 35 x 30 x 55mm, 13 mOhm/17 nH
20uf/750VDC, 35 x 30 x 55mm, 10/17
30uf/600VDC, 35 x 30 x 55mm, 9/17
47uf/600VDC, 46 mm dia x 57mm(H), 7/17
M-LYTIC Audio Grade Power Cap
M-Lytic
Audio Grade Power Cap
With the MLytic Audio Grade series we are extending our range of products to a series especially conceived for applications within the pre-amplifiers or small power amplifiers.
The assemblage always refers to snap-in models for assembly boards. Throughout its development,
importance was placed upon attaining low ESR and ESL values, as well as a low inner-sound development.
Storage facilities are currently being constructed.
Please feel hence free to enquire about the availability of the required merchandise.
The scheduled models only represent
a small part of our range of electrical and mechanical fittings.
If you require other merchandise and measurements, contact us and we will be pleased to submit you an individual offer.
Capacitance, Size:Dia x Length
15000uf/25VDC, 30 x 30mm, 25 mOhm/10 nH
22000uf/25VDC, 30 x 40mm, 18 mOhm/10 nH
10000uf/35VDC, 25 x 40mm, 35 mOhm/10 nH
15000uf/35VDC, 30 x 40mm, 25 mOhm/10 nH
22000uf/35VDC, 30 x 50mm, 18 mOhm/10 nH
2200uf/50VDC, 22 x 25mm, 110 mOhm/10 nH
4700uf/50VDC, 22 x 35mm, 55 mOhm/10 nH
10000uf/50VDC, 30 x 40mm, 25 mOhm/10 nH
15000uf/50VDC, 30 x 50mm, 18 mOhm/10 nH
22000uf/50VDC, 35 x 50mm, 14 mOhm/10 nH
2200uf/63VDC, 22 x 30mm, 55 mOhm/10 nH
4700uf/63VDC, 25 x 50mm, 32 mOhm/10 nH
10000uf/63VDC, 30 x 50mm, 25 mOhm/10 nH
22000uf/63VDC, 40 x 80mm, 20 mOhm/10 nH
|
M-LYTIC HC High Current Power Cap
MLytic HC
The MLytic HC are true high end electrolytic capacitors.
A patented method for internal contacting enables the realization of a very low ESR and the most marginal residual inductivity.
Since these capacitors have been designed for permanent currents of up to several hundred amperes.
They are well-prepared for installation on a dissipater.
Due to these attributes these capacitors can supply extreme peak currents.
They do this very quickly and thus form the basis for a dynamic, precise bass as well as a lively and clear middle/high tone range.
Even with extreme bass impulses the playback remains stable and clean, without any compression effects whatsoever.
Capacitance, Size:Dia x Length, ESR(mOhm at 100Hz)
22,000uf/80VDC, 75mm dia.x 69mm h , 5 m Ohm
33,000uf/80VDC, 90mm dia.x 69mm h , 5 m Ohm
47,000uf/80VDC, 90mm dia.x 69mm h , 5 m Ohm
22,000uf/100VDC, 90mm dia.x 69mm h , 6 m Ohm
33,000uf/100VDC, 90mm dia.x 69mm h , 6 m Ohm
47,000uf/100VDC, 90mm dia.x 98mm h , 6 m Ohm |
M-LYTIC HV High Voltage Power Cap
M-Lytic HV
The MLytic HV electrolytic capacitors have been developed from the latest materials and under utilization of the most modern manufacturing technique especially for the requirements of tube amplifiers.
The 450VDC versions have an axial construction form, whereas the 500VDC types are offered in snap-in housings.
Following many classic designs,these capacitors are offered as double capacity.
In addition to the utilization in new developments, they are also outstandingly suitable for repairs and tuning of existing amplifiers.
Capacitance, Size:Dia x Length
15uf+ 15uf / 450VDC, 25mm dia.x 38mm h
33uf+ 33uf / 450VDC, 25mm dia.x 49mm h
47uf+ 47uf / 450VDC, 30mm dia.x 49mm h
100uf+ 100uf / 450VDC, 35mm dia.x 50mm h
16uf+ 16uf / 500VDC, 35mm dia.x 50mm h
32uf+ 32uf / 500VDC, 35mm dia.x 50mm h
40uf+ 40uf / 500VDC, 35mm dia.x 50mm h
50uf+ 50uf / 500VDC, 35mm dia.x 50mm h
100uf+ 100uf / 500VDC, 35mm dia.x 65mm h
150uf+ 150uf / 500VDC, 35mm dia.x 65mm h
200uf+ 200uf / 500VDC, 35mm dia.x 80mm h
Electrolytic
capacitor, Bipolar ELKOS BG35/BG50, GLATT series
Alum. plate in smooth type surface,tol. 5% Application ex.;
equalizer or crossover at parallel connection.
Capacitance, Size:Dia x Length
47uf/35V 25 x 38mm
68uf/35V 20 x 50mm
100uf/35V 31 x 51mm
2.2uf/50V 10 x 30mm
3.3uf/50V 12 x 30mm
4.7uf/50V 12 x 30mm
5.6uf/50V 14 x 30mm
6.8uf/50V 14 x 30mm
10uf/50V 14 x 37mm
15uf/50V 18 x 38mm
22uf/50V 25 x 38mm
33uf/50V 25 x 38mm
|
Electrolytic
capacitor, BR63/BR100 Nonpolar,RAUH series
Alum. plate in Rough type surface,tol. 5%
Application ex.;
High capacitance emitting circuit or equalizer
Capacitance, Size:Dia x Length
10uF/100V 10 x 30mm
15uF/100V 10 x 30mm
22uF/100V 12 x 30mm
33uF/100V 12 x 30mm
47uF/100V 14 x 38mm
56uF/100V 16 x 39mm
68uF/100V 16 x 39mm
82uF/100V 18 x 39mm
100uF/100V 18 x 39mm
150uF/63V 16 x 38mm
220uF/63V 18 x 39mm
330uF/63V 21 x 36mm
400uF/63V 25 x 38mm
470uF/63V 25 x 38mm
680uF/63V 25 x 50mm
Mcap ZN PP
capacitor, tin foil series
M-CAPZN is a milestone
on the road to perfect music re-production!
Application ex.;
Active cross-over or Amplifier power filtering
Capacitance, Size:Dia x Length
1 uf/250V 18
x 39mm
1.5 uf/250V 21 x 39mm
2.2 uf/425V 8 x 30mm
3.3 uf/100V 20 x 39mm
3.9 uf/100V 24 x 41mm
4.7 uf/100V 25 x 41mm |
Mcap MKP Metalized
PP capacitor, Supreme series
If you're serious about
high end, you need to try this capacitor!
Application ex.;
in midrange speaker unit's coupling or parallel and Bass driver unit's
parallel
Capacitance, Size:Dia x Length, tol. +/- 2%, typ. 1%, VDC
0.1uf/1200VDC 16.5 x 34mm
0.22uf/1200V 18 x 37.5mm
0.33uf/1200V
0.47uf/680V
1 uf/680V 20 x 40mm
1.5 uf/680V 25 x 55mm
2.2 uf/680V 25 x 55mm
2.7 uf/680V 30 x 56mm
3.3 uf/680V 30 x 56mm
3.9 uf/680V 30 x 56mm
4.7 uf/680V 36 x 56mm
5.6 uf/680V 36 x 56mm
6.8 uf/680V 41 x 57mm
8.2 uf/680V 36 x 106mm
10 uf/680V 36 x 106mm
15 uf/680V 41 x 102mm
22 uf/680V 50 x 106mm
2.2 uf/680V 40 x 55mm
3.9uf/680V 40 x 55mm
|
Mcap MKP
Metalized PP capacitor, Audiophile series
Tolerance : max.3%, typically. 1.5% Loss ang. tan d = 0.0002 (for 1kHz/1µF)
The practically induction-free type of construction and the low loss factor of the M-CAP results in a very "quick" capacitor.
The M-CAP forms the basis for vivid music reproduction rich in nuance.
Application ex.: The 630 V DC version with capacitances in the range from 0.1 µF to 0.82 µF is equally suitable as a bypass capacitor in high quality frequency crossovers or as a coupling capacitance in valve and transistor amplifier.
Capacitance, Dimension (Size:Dia. x Length)
0.1 uf/400V
0.15 uf/400V
0.22 uf/400V
0.47 uf/400V
0.56 uf/400V
0.68 uf/400V
0.82 uf/400V
1 uf/400V
2.2 uf/400V
3.3 uf/400V
4.7 uf/400V 20 x 34mm
5.6 uf/400V
6.8 uf/400V
8.2 uf/400V 24 x 37mm
10 uf/400V 26 x 39mm
12 uf/400V
15 uf/400V
22 uf/400V
33 uf/400V
47 uf/400V
56 uf/400V
68 uf/400V
100 uf/400V
150 uf/400V
6.8uf/800V
10 uf/630V
15uf/800V
22uf/800V |
Mcap Power
PCC Car Buffer Capacitor
´Capacitance,
Size:Dia x Length
PCC500 50,000uf/18VDC 76 x 145mm
PCC1000 100,000uf/18VDC 76 x 227mm
PCC1500 150,000uf/18VDC 76 x 227mm
 |
Mcap Power Cap with protection circuitry & green voltmeter
SC71000G 1F/20VDC
76 x 280mm
SC71500G 1.5F/20VDC
76 x 280mm
Mcap Power Cap with protection circuitry & red voltmeter
SC71000R 1F/20VDC
76 x 280mm
SC71500R 1.5F/20VDC
76 x 280mm |
Write if need other
spec
|
